Heating water as a heat transfer medium is one of the most important components of a heating system. If drinking water is simply filled into the heating system without appropriate treatment, this carelessness will pay off sooner or later. Over 90% of malfunctions and damage in heating systems result from incorrect heating water. Whether jammed valves, stuck pumps or muddy underfloor heating circuits. In most cases, the symptoms are due to untreated heating water. With coracon® heating protection products you safely prevent rust, limescale and other deposits.
- Environmentally friendly heating protection concentrate for hot water heating systems, underfloor heating systems or capillary heating systems
- Optimum protection against corrosion through innovative OAT inhibitors
- Prevents sludge formation and other deposits
- Improves heat transfer
- pH-value stabilizing
- Hard water stable up to a total hardness of 15 °dH
- Free of molybdenum
- Miscible with water in any ratio
Key data
- Nitrite-free, secondary amine-free, borate-free, molybdenum-free, free of 2-ethylhexanoic acid
- Corrosion protection on OAT basis (Organic Acid Type)
- Biodegradable
- pH-value stabilizing properties
- Lightly dispersing properties
- Colour: clear
- Specific weight: 1.1 g/ml (DIN 51757)
- pH value at 0.5% application concentration: 8.3±0.15 (ASTM-D 1287)
- Electrical conductivity at 0.5% application concentration in demineralised water: approx. 600 μS/cm
- No hazardous material, no hazardous substance
- Water hazard class: WGK 1
- Environmentally friendly heating protection concentrate for hot water heating systems, underfloor heating systems or capillary heating systems
- Conditioning of new or cleaned heating circuits with demineralised water
- VDI 2035 guideline value for electrical conductivity with low-salt operation is adhered to
- Optimum protection against corrosion through innovative OAT inhibitors
- Prevents sludge formation and other deposits
- Improves heat transfer
- pH-value stabilizing
- Nitrite, phosphate and secondary amine free
- Miscible with water in any ratio
- No hazardous material, no dangerous goods
Key data
- Nitrite-free, phosphate-free, secondary amine-free, borate-free, zinc-free, molybdenum-free, free of 2-ethylhexanoic acid
- Corrosion protection on OAT basis (Organic Acid Type)
- Biodegradable
- pH-value stabilizing properties
- No dispersing properties
- Colour: clear, light yellow
- Specific weight: 1.039 ± 0.004 g/ml (DIN 51757)
- pH value: 8.60 ± 0.2 (ASTM-D 1287) (at 0.5% application concentration)
- Electrical conductivity: approx. 65 μS/cm (*) (at 0.5% application concentration)
- No hazardous material, no hazardous substance